Raleigh and Wake County health inspection record1 - Restaurant · 27603
Weaver Street Market
404 W Hargett St, Raleigh, NC · (919) 429-7800
Did they pass? Yes. Weaver Street Market passed its most recent Raleigh health inspection on October 27, 2026.
- Inspections, last 12 months
- 2
- Passed
- 2
- Failed
- 0
- Visits with pests noted
- 0
- Facility type
- 1 - Restaurant
- Record ID
- 04092018173
- Last inspected
- October 27, 2026
The latest inspection, x-rayed
What the inspector found on October 27, 2026
Every inspection, newest first
-
October 27, 2026Passed
- Handwashing sinks supplied & accessible Chemical spray bottle hanging off of splash guard of handwashing sink; and large chunk of ice in the sink. A handwashing sink shall be maintained so that it is accessible at all times for employee use. A handwashing sink may not be used for purposes other than handwashing. Cdi- bottle removed during inspection. What this means
- Food-contact surfaces: cleaned & sanitized The high-temperature dish machine sanitizing rinse not reaching a high enough temperature at the dishes; measured at 154F after several runs. In a mechanical operation; the temperature of the fresh hot water sanitizing rinse as it enters the manifold may not be more than 90c (194F); or less than 82c (180F); and at least 160F at the dishes (4-703.11). Cdi- repairman already on site. PIC directed to use 3-comp sink for chemical sanitizing until dish machine repairs complete. 4-601.11(a); priority foundation; large pizza cutter stored as clean observed with food residue remaining. Equipment food-contact surfaces and utensils shall be clean to sight and touch. Cdi- soiled items returned to dish room. What this means
- Proper cold holding temperatures (a)(2) and (b); priority; cold-holding: at the salad bar; hard boiled eggs at 45F in the top portion; pasta salad at 44.5F; and baked tofu at 44F. Pizza sauce left out on counter at 56F. Maintain cold temperature control for safety (TCS) foods at 41F and less. Cdi- TCS foods exceeding 41F voluntarily discarded by PIC during inspection. At salad bar; keep TCS foods below the pan file lines for improved cold-holding. What this means
- Proper date marking & disposition Disposition: in the coffee section; one open container of soy milk lacking date; opened-on date unknown. Prepared TCS food shall be discarded if it exceeds the temperature and time combination as specified in food code (up to 7 days when maintained at 41F and less). Cdi- past date product voluntarily discarded by PIC during inspection. [repeat] What this means
- Time as a public health control; procedures & records Written methods for using time as public health control (tphc) not in place for most items at the hot bar. Temperature log not in place to note start temperature of TCS foods placed on tphc; so no way for managers to verify required start temperatures achieved. Written tracking also missing for these items. Thick pizza hot-holding at 109F. Recommend using tphc for the pizza-by-the-slice. If time without temperature control is used as the public health control for a working supply of potentially hazardous food (time/temperature control for safety food) before cooking; or for ready-to-eat potentially hazardous food (time/temperature control for safety food) that is displayed or held for sale or service: written procedures shall be prepared in advance; maintained in the food establishment and made available to the regulatory authority upon request that specify methods of compliance with food code. If time without temperature control is used as the public health control up to a maximum of 4 hours: the food shall have an initial temperature of 5 c (41F) or less when removed from cold holding temperature control; or 57 c (135F) or greater when removed from hot holding temperature control What this means
- Wiping cloths: properly used & stored Sanitizer concentration too low in sanitizer bucket in deli area; measured at 0ppm quat. Sanitizer concentration at dispenser also at 0ppm. Cloths in-use for wiping counters and other equipment surfaces shall be held between uses in a chemical sanitizer solution at the required concentration (50-200ppm chlorine; 200-400 quat). Cdi- sanitizer block in the dispenser replaced; now too high; turning the test strip blue (500+PPM). PIC contacted ecolab for servicing. Dilute the sanitizer and test to verify correct concentration reached until dispenser can be repaired/replaced. What this means
- Single-use & single-service articles: properly stored & used (a) and (c); core; tall stacks of unwrapped uncovered single-service beverage containers stored at front service counter with drinking surfaces exposed to customer potential touch and sneeze. Single-service and single-use articles shall be kept in the original protective package or stored by using other means that afford protection from contamination until used. Keep single serve drink containers inverted food-side down and in original plastic sleeve pulled up to drinking surface of top cup; in enclosed cup dispenser; or move cups away from customers.
- Equipment; food & non-food contact surfaces approved; cleanable; properly designed; constructed & used Four clear plastic food storage lids stored as clean observed cracked through to food surface. Multiuse food-contact surfaces shall be: smooth; free of breaks; open seams; cracks; chips; inclusions; pits; and similar imperfections; and free of sharp internal angles; corners; and crevices. Cdi- damaged lids voluntarily discarded by PIC during inspection. What this means
- Warewashing facilities: installed; maintained & used; test strips Hi-temperature sanitizing dish machine used. Battery of PIC's plate simulating temperature disk has died; with no spare battery available. In hot water mechanical warewashing operations; an irreversible registering temperature indicator shall be provided and readily accessible for measuring the utensil surface temperature. Mechanical hi-temp dish machine shall reach at least 160F at the dishes (4-703.11). Cdi- PIC educated on requirement. A few 160F thermal labels provided to tide over PIC until plate simulating temperature disk repaired/replaced. Obtain an irreversible registering temperature indicator prior to your next inspection. What this means
- Non-food contact surfaces clean (b) and (c); core; residue/debris accumulation on low cold-hold unit door tracks and door surrounds; around fan box in meat walk-in cooler; and along racks in walk-in cooler units. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust; dirt; food residue; and other debris. Increase cleaning frequency to these areas. [repeat] What this means
- Plumbing installed; proper backflow devices In the walk-in freezer; a large amount of ice has formed that appears to be leakage from the fan box unit; dripping onto boxes of food stored under the unit. A plumbing system shall be repaired according to law; and maintained in good repair. 3-305.11; core; food shall be protected from contamination by storing the food: in a clean; dry location; where it is not exposed to splash; dust; or other contamination. Move the boxed food away from this area. Repair the leaking plumbing. Remove the built up ice. What this means
-
March 20, 2026Passed
- Food-contact surfaces: cleaned & sanitized (a); priority foundation; many plastic pans stored as clean with sticker residue remaining. Equipment food-contact surfaces and utensils shall be clean to sight and touch. Cdi- stored pans returned for additional cleaning and PIC educated on requirement. Look into stickers that remove more cleanly; or how to improve cleaning methods. [repeat] 4-501.114; priority; sanitizer concentration too low at the 3-comp sink sanitizer dispenser; measured at 0-50ppm quat. A chemical sanitizer used in a sanitizing solution for a manual or mechanical operation shall meet the criteria specified in food code; and shall be used in accordance with the epa-registered label use instructions. Maintain quat sanitizer at least 200-400ppm. Cdi- ecolab called for service. 3-comp not in use yet; will await dispenser adjustment. What this means
- Toxic substances properly identified stored & used Labeling missing on bucket of sanitizer. Working containers used for storing poisonous or toxic materials such as cleaners and sanitizers taken from bulk supplies shall be clearly and individually identified with the common name of the material. Add labeling before use. [repeat] What this means
- Food properly labeled: original container Labeling missing on container of spice and squeeze bottle of oil in oven area. Working containers holding food or food ingredients that are removed from their original packages for use in the food establishment; such as cooking oils; flour; herbs; potato flakes; salt; spices; and sugar shall be identified with the common name of the food. Add labeling to these items.
- Wiping cloths: properly used & stored Sanitizer concentration too low in sanitizer bucket in the oven area; measured at 0ppm quat. Cloths in-use for wiping counters and other equipment surfaces shall be held between uses in a chemical sanitizer solution at the required concentration (50-200ppm chlorine; 200-400 quat). Adjust the sanitizer concentration higher and use sanitizer test kit to verify correct concentration reached. Cdi- sanitizer returned to dish room and emptied. What this means
- Utensils; equipment & linens: properly stored; dried & handled (a); (b) and (d); core; several plastic pans stored as clean observed stacked wet. Clean equipment and utensils shall be stored in a self-draining position that allows air drying; and covered or inverted. Allow pans to thoroughly air dry before stacking. What this means
- Non-food contact surfaces clean (b) and (c); core; residue/debris accumulation on low pan shelving and low cold-hold unit door tracks throughout. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust; dirt; food residue; and other debris. Increase cleaning frequency to these areas. 4-601.11(b) and (c); core; ice machine with some black microbial film buildup along ice baffle; not currently in direct contact with ice below. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust; dirt; food residue; and other debris. Increase cleaning frequency to these areas. What this means
- Plumbing installed; proper backflow devices The spray hose at the 3-comp sink hangs down very low into the sink. The spray hose at the dish machine intake does the same. The curly metal support may have been installed backwards. An air gap between the water supply inlet and the flood level rim of the plumbing fixture; equipment; or nonfood equipment shall be at least twice the diameter of the water supply inlet and may not be less than 25 mm (1 inch). Vr-verification required. Repair/replace hose so that spray head when hanging freely is at least 1-inch higher that the level of the front rim of the sink. Complete repairs within 72 hours (3 days) and text picture of the completed repair to your rehs joanne rutkofske at 919-623-0459 for verification correction complete. What this means
- Physical facilities installed; maintained & clean Caulk has black microbial growth down into the caulk around the 3-comp sink and around the dish machine intake area. One light out in meat walk-in cooler. Physical facilities shall be maintained in good repair. Recaulk these areas so smooth and cleanable. Replace the burnt out light. What this means
From the Wake County Environmental Services, published as Wake County Open Data, Restaurant Inspections. Text is the inspector's, shortened only for length. North Carolina scores each inspection out of 100. Here, 90 or above (grade A) counts as passed, 80 to 89.5 (grade B) as passed with conditions, and below 80 (grade C or lower) as failed. Priority items and CDC risk factors are listed as serious.
Questions
Did Weaver Street Market pass its health inspection?
Yes. Weaver Street Market passed its most recent Raleigh health inspection on October 27, 2026.
How many times was Weaver Street Market inspected in the last year?
2 times in the last 12 months, with 0 failed results.
Who inspects Weaver Street Market?
The Wake County Environmental Services. North Carolina scores each inspection out of 100. Here, 90 or above (grade A) counts as passed, 80 to 89.5 (grade B) as passed with conditions, and below 80 (grade C or lower) as failed. Priority items and CDC risk factors are listed as serious.