Raleigh and Wake County health inspection record1 - Restaurant · 27603
Gussie's
927 W Morgan St, Raleigh, NC
Did they pass? Yes. Gussie's passed its most recent Raleigh health inspection on August 27, 2026.
- Inspections, last 12 months
- 2
- Passed
- 2
- Failed
- 0
- Visits with pests noted
- 1
- Facility type
- 1 - Restaurant
- Record ID
- 04092019256
- Last inspected
- August 27, 2026
The latest inspection, x-rayed
What the inspector found on August 27, 2026
Every inspection, newest first
-
August 27, 2026Passed
- Food-contact surfaces: cleaned & sanitized Sanitizer concentration too low at the kitchen dish machine; measured at 25ppm chlorine. Sanitizer too low at the 3-comp sink dispenser; measured at 100ppm quat. A chemical sanitizer used in a sanitizing solution for a manual or mechanical operation shall meet the criteria specified in food code; and shall be used in accordance with the epa-registered label use instructions. Maintain chlorine sanitizer to at least 50ppm; and quat at 200-400ppm. Cdi- repair service called. Sanitizer dispensing of equipment adjusted during inspection. What this means
- Food properly labeled: original container Labeling missing on a few spices and squeeze bottles of food ingredients. Working containers holding food or food ingredients that are removed from their original packages for use in the food establishment; such as cooking oils; flour; herbs; potato flakes; salt; spices; and sugar shall be identified with the common name of the food. Add labeling to these items. [repeat]
- PestsInsects & rodents not present; no unauthorized animals A few house flies and fruit flies observed in the kitchen. The premises shall be maintained free of insects; rodents; and other pests. Increase pest control measures. What this means
- Wiping cloths: properly used & stored Sanitizer concentration too low in sanitizer bucket; and at 3-comp sanitizer dispenser; measured at 0-100ppm quat. Cloths in-use for wiping counters and other equipment surfaces shall be held between uses in a chemical sanitizer solution at the required concentration (50-200ppm chlorine). Cdi- repair service called to adjust dispenser. Repair person arrived; dispensing adjusted during inspection. Buckets can now be remade. What this means
- In-use utensils: properly stored Knife at prep unit stored wedged in soiled space between pieces of equipment. During pauses in food preparation or dispensing; food preparation and dispensing utensils shall be stored: in the food with their handles above the top of the food; or in a clean/dry; protected location; or in a container of water if the water is maintained at a temperature of at least 135F and the container is cleaned at a frequency specified in food code (every 4 hours). Cdi- utensil returned for cleaning during inspection. What this means
- Single-use & single-service articles: properly stored & used (a) and (c); core; a few stacks of unwrapped uncovered single-service containers stored food-side up. Single-service and single-use articles shall be kept in the original protective package or stored by using other means that afford protection from contamination until used. Cdi- containers inverted food-side down during inspection.
- Equipment; food & non-food contact surfaces approved; cleanable; properly designed; constructed & used Rusted/peeling wire shelving in multiple cold-hold units. Equipment shall be maintained in a state of good repair and condition. Equipment components such as doors; seals; hinges; fasteners; and kick plates shall be kept intact; tight; and adjusted in accordance with manufacturers specifications. Repair/replace these items. [repeat] What this means
- Non-food contact surfaces clean (b) and (c); core; debris/residue accumulation in the tall reach-in cold-hold units. Dust and sticky residue accumulation on wire dry storage racks and counter fan in kitchen. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust; dirt; food residue; and other debris. Increase cleaning frequency to these areas. [repeat] What this means
- Physical facilities installed; maintained & clean Dust accumulation around ceiling vents and surrounding ceiling tiles in clean dish storage area. Physical facilities shall be cleaned as often as necessary to keep them clean. Increase cleaning frequency to these areas. 6-501.12; core; residue/debris accumulation along floors under and around equipmentstorage; and behind cook line. Physical facilities shall be cleaned as often as necessary to keep them clean. Increase cleaning frequency to these areas and clean thoroughly. What this means
-
February 18, 2026Passed
- Required records available: shellstock tags; parasite destruction Shellstock tags: one pan of oysters in prep unit lacking its shellstock tag. A container of shellstock that does not bear a tag or label or that bears a tag or label that does not contain all the information as specified under (a) of this section shall be subject to a hold order; as allowed by law; or seizure and destruction in accordance with 21 CFR subpart d - specific administrative decisions regarding interstate shipments; section 1240.60(d). Cdi- product returned to storage next to known box it came from and labeling system added to tie pan to the oyster tag.
- Proper cooling time & temperatures Cooling rate (chili in walk-in cooler): 106.8F - 76.1F in (4:03-5:47pm) 104min = 30.7degrees/104min = 0.295F/min 3-501.14; priority; cooling rate: chili in walk-in cooler cooling in large thick plastic containers from 106.8F - 76.1F in (4:03-5:47pm) 104min = 30.7degrees/104min = 0.295F/min cooling rate. This is less than the 0.54F/min or greater rate needed when cooling foods in range of 135F down to 70F. The chili is not cooling at a fast enough rate. Cdi- chili placed in ice bath; then back to speed rack in walk-in cooler. What this means
- Proper cold holding temperatures (a)(2) and (b); priority; cold-holding: in the coffee service low cooler; container of milk holding at 42.5F. In the middle prep unit; opened container of heavy cream holding at 43F; recommend holding this type of container down below. Maintain cold temperature control for safety (TCS) foods at 41F and less. Cdi- TCS foods exceeding 41F voluntarily discarded by PIC during inspection. [repeat] What this means
- Proper date marking & disposition Disposition: date-marking missing on opened container of milk and opened container of cream in front coffee service section; opened-on dates unknown. In walk-in cooler; opened container of egg whites dated 2/9; on day 10 of hold. Refrigerated; ready-to-eat; potentially hazardous food (time/temperature control for safety food) prepared and held in a food establishment for more than 24 hours shall be date-marked. The day of preparation shall be counted as day 1 (ex.-date the milk opened; date the meat/vegetable cooked). Add date mark to prepared TCS foods that will be held over to the next day. When freezing cooked TCS foods; include the date cooked/date frozen/date thawed. Prepared TCS food shall be discarded if it exceeds the temperature and time combination as specified in food code (up to 7 days when maintained at 41F and less). Cdi- products past 7-day hold and product with unknown prep dates voluntarily discarded by PIC during inspection. What this means
- Proper cooling methods used; adequate equipment for temperature control Chili in walk-in cooler cooling in large thick plastic containers 3-501.15; priority foundation; cooling methods: chili in walk-in cooler cooling in large thick plastic containers; not cooling at a fast enough rate. Cooling shall be accomplished in accordance with the time and temperature criteria specified in food code by using one or more of the following methods based on the type of food being cooled: placing the food in shallow pans; separating the food into smaller or thinner portions; using rapid cooling equipment; stirring the food in a container placed in an ice water bath; using containers that facilitate heat transfer (metal); adding ice as an ingredient; or other effective methods. When placed in cooling or cold holding equipment; food containers in which food is being cooled shall be: arranged in the equipment to provide maximum heat transfer through the container walls; and loosely covered; or uncovered if protected from overhead contamination (ex.- on speed rack with top cover pan). Cdi- products moved to ice bath; then placed back on speed rack in walk-in cooler. What this means
- Food properly labeled: original container Labeling missing on spices and squeeze bottles of food ingredients. Working containers holding food or food ingredients that are removed from their original packages for use in the food establishment; such as cooking oils; flour; herbs; potato flakes; salt; spices; and sugar shall be identified with the common name of the food. Add labeling to these items.
- Personal cleanliness Food handler with fluffy beard lacking beard guard. Food employees shall wear hair restraints such as hats; hair coverings or nets; beard restraints; and clothing that covers body hair; that are designed and worn to effectively keep their hair from contacting exposed food; clean equipment; utensils; and linens; and unwrapped single-service and single-use articles. Ensure food employees keep facial hair trimmed very short; or supply beard guard or face masks. Cdi- PIC provided face mask for employee during inspection. [repeat]
- Equipment; food & non-food contact surfaces approved; cleanable; properly designed; constructed & used Walmart blender labeled for household use only. Except for toasters; stand mixers; microwave ovens; water heaters; and hoods; food equipment shall be used in accordance with the manufacturers intended use and certified or classified for sanitation by an american national standards institute (ansi)-accredited certification program. Remove the blender. If you need a blender for commercial/restaurant use; obtain a commercial grade blender. 4-501.11; core; rusted/peeling wire shelving in multiple cold-hold units. Walk-in cooler entry floor plate is loose; not fastened down; where debris can accumulate underneath. Equipment shall be maintained in a state of good repair and condition. Equipment components such as doors; seals; hinges; fasteners; and kick plates shall be kept intact; tight; and adjusted in accordance with manufacturers specifications. Repair/replace these items. 4-202.11; priority foundation; yellow painted manual juice squeezer observed with paint starting to peel/chip off. Multiuse food-contact surfaces shall be: smooth; free of breaks; open seams; cracks; chips; inclusions; pits; and similar imperfections; and free of sharp internal angles; corners; and crevices. Cdi- What this means
- Non-food contact surfaces clean (b) and (c); core; multiple bins of smallwares stored as clean with debris/residue accumulation in the bins. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust; dirt; food residue; and other debris. Cdi- bins and wares returned for cleaning during inspection. 4-601.11(b) and (c); core; debris/residue accumulation in the tall reach-in cold-hold units. Nonfood-contact surfaces of equipment shall be kept free of an accumulation of dust; dirt; food residue; and other debris. Increase cleaning frequency to these areas. What this means
- Garbage & refuse properly disposed; facilities maintained Core: loose litter and leaf litter accumulation on ground around the dumpsters. A storage area and enclosure for refuse; recyclables; or returnables shall be maintained free of unnecessary items and clean. Increase cleaning frequency to this area.
From the Wake County Environmental Services, published as Wake County Open Data, Restaurant Inspections. Text is the inspector's, shortened only for length. North Carolina scores each inspection out of 100. Here, 90 or above (grade A) counts as passed, 80 to 89.5 (grade B) as passed with conditions, and below 80 (grade C or lower) as failed. Priority items and CDC risk factors are listed as serious.
Questions
Did Gussie's pass its health inspection?
Yes. Gussie's passed its most recent Raleigh health inspection on August 27, 2026.
How many times was Gussie's inspected in the last year?
2 times in the last 12 months, with 0 failed results and 1 visit where the inspector noted pests.
Who inspects Gussie's?
The Wake County Environmental Services. North Carolina scores each inspection out of 100. Here, 90 or above (grade A) counts as passed, 80 to 89.5 (grade B) as passed with conditions, and below 80 (grade C or lower) as failed. Priority items and CDC risk factors are listed as serious.