Raleigh and Wake County health inspection record1 - Restaurant · 27607
Rex Hospital Cafeteria
4420 Lake Boone Trl, Raleigh, NC · (919) 784-4173
Did they pass? Yes. Rex Hospital Cafeteria passed its most recent Raleigh health inspection on August 17, 2026.
- Inspections, last 12 months
- 2
- Passed
- 2
- Failed
- 0
- Visits with pests noted
- 0
- Facility type
- 1 - Restaurant
- Record ID
- 04092010617
- Last inspected
- August 17, 2026
The latest inspection, x-rayed
What the inspector found on August 17, 2026
Every inspection, newest first
-
August 17, 2026Passed
- Proper hot holding temperatures Observation: cooked chicken in the hot holding cabinet; display case in the cafe (112F; 124F) is no tholding 135F or higher; temperature is used for these tow hot hoding areas and tphc is not implemented. Cdi: chicken was discarded during inspection; all items on hot service line to be temperature checked at end of service (3/4 hrs) and food items discarded if not 135F or higher. 3-501.16 (a) (1) time / temperature control for safety food; hot and cold holding (p) except during preparation; cooking; or cooling; or when tphc is used; TCS food shall be maintained at 135°F or above; except that roasts may be held at 130°F or above. P What this means
- Personal cleanliness Observation: staff observed with artificial nails/nail polish not wearing gloves during all tasks in kitche; cdi: staff member placed gloves on during inspection. 2-302.11 maintenance - fingernails (pf) (b) unless wearing intact gloves in good repair; a food employee may not wear fingernail polish or artificial fingernails when working with exposed food. - pf
- In-use utensils: properly stored Observation: in use tongs being placed on oven handles between use where contamination can occur. Ensure that in use utensils are stored on clean surface between use protected from sources of contamination; cdi: tongs were placed on clean food service pan. 3-304.12 in-use utensils; between-use storage (c) during pauses in food preparation or dispensing; food preparation and dispensing utensils shall be stored: (a) in the food with their handles above the top of the food and the container; (b) in non TCS food with their handles above the top of the food within containers that can be closed; such as bins of dry goods; (c) on a clean; sanitized surface; (d) in running water of sufficient velocity to flush particulates to the drain; if used with moist food such as ice cream or mashed potatoes; (e) in a clean; protected location if the utensils; such as ice scoops; are used only with a nontcs food; or (F) in a container of water if the water is maintained at a temperature of at least 135F What this means
- Equipment; food & non-food contact surfaces approved; cleanable; properly designed; constructed & used Observation: the gasket on the front hot holding cabinet torn/poor reapir (*door will not close); cooler 6 on the service line is condensing extensively top section/falling onto closed packaged items on top section; 4-501.11 good repair and proper adjustment - equipment (c) a) equipment shall be maintained in a state of repair and condition that meets the requirements specified under parts 4 1 and 4-2. (b) equipment components such as doors; seals; hinges; fasteners; and kick plates shall be kept intact; tight; and adjusted in accordance with manufacturer's specifications.(c) cutting or piercing parts of can openers shall be kept sharp to minimize the creation of metal fragments that can contaminate food when the container is opened. Observation: the thermometer on the warewash machine is not in good repair for final rinse; final rinse when tested 167.5. 4-502.11 (a) and (c) good repair and calibration-utensils and temperature and pressure measuring devices (c) (c) ambient air temperature; water pressure; and water temperature measuring devices shall be maintained in good repair and be accurate within the intended range of use. What this means
- Non-food contact surfaces clean Observation: the non-food contact surfaces of the following areas are accumulated with visible debris: interior walls of the plate warmer; single service items containers on the service line/front self service area. Increase cleaning in these areas. 4-602.13 nonfood contact surfaces (c) non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. What this means
- Physical facilities installed; maintained & clean Observation: the floor coating on the cook/retail hot line is bubbling and no longer cleanable; plan for repair of these areas. 6-501.11 physical facilities shall be maintained in good repair. Repairing - premises; structures; attachments; and fixtures - methods (c) What this means
- Meets ventilation & lighting requirements; designated areas used Observation: the hood system for the high temperature wahsing machine is insufficient to keep steam from collecting on drop cieling tiles; equipment in surrounding area. 4-301.14 ventilation hood systems; adequacy (c) hood systems shall prevent grease or condensation from collecting on equipment; walls; and ceilings. What this means
-
January 20, 2026Passed
- Proper hot holding temperatures Observation: coked potatoes (123F); sauce(s) (121F;119F) in the hh cabinet front production line; cooked potato wedges in the retail line production observed (127F;124F); cdi: products in the front hh cabinet are from breakfast service and food also staged for lunch service; sauces were removed and reheated (167F;169F) and potatoes voluntaril discarded (breakfast items); the potato wedges for the retail production support were removed from cabinet and reheated for hh (166F;172F); it is suggested to implement a written time control policy (tphc) for products that are not saved after food service. 3-501.16 (a) (1) time / temperature control for safety food; hot and cold holding (p) maintain TCS foods in hot holding at 135F or above. -p What this means
- Wiping cloths: properly used & stored Observation: in use wiping clothes not beign stored in a sanitizer between use on the front production area. Ensure that wiping clothes are placed in a sanitizer between use. 3-304.14 wiping cloths; use limitations (c) hold in-use wiping cloths in properly concentrated sanitizer between uses. What this means
- Equipment; food & non-food contact surfaces approved; cleanable; properly designed; constructed & used Observation: the gasket on the service refrigerator on the patient meal production line (upright) in poor repair/torn. 4-501.11 good repair and proper adjustment - equipment (c) maintain equipment in good repair. What this means
- Warewashing facilities: installed; maintained & used; test strips Observation: the pressur eobserved during final rinse cycle for the controlled hot water rinse exceed 35psi ont he pressure gauge. 4-501.113 mechanical warewashing equipment; sanitization pressure. The flow pressure of the fresh hot water sanitizing rinse in a warewashing machine; as measured in the water line immediately downstream or upstream from the fresh hot water sanitizing rinse control value; shall be within the range specified on the machine manufacturer’s data plate and may not be less than 35 kilopascals (5 pounds per square inch) or more than 200 kilopascals (30 pounds per square inch). What this means
- Non-food contact surfaces clean Observation: the non-food contact surfaces of the following areas are accumulated with visible debris: interior walls of the plate warmer; handles on the rear prep refrigerator. Compressor fan covers (upright refrigerator-front service). Increase cleaning in these areas. 4-602.13 nonfood contact surfaces (c) non food contact surfaces of equipment shall be cleaned frequently to preclude accumulation of soil residues. What this means
From the Wake County Environmental Services, published as Wake County Open Data, Restaurant Inspections. Text is the inspector's, shortened only for length. North Carolina scores each inspection out of 100. Here, 90 or above (grade A) counts as passed, 80 to 89.5 (grade B) as passed with conditions, and below 80 (grade C or lower) as failed. Priority items and CDC risk factors are listed as serious.
Questions
Did Rex Hospital Cafeteria pass its health inspection?
Yes. Rex Hospital Cafeteria passed its most recent Raleigh health inspection on August 17, 2026.
How many times was Rex Hospital Cafeteria inspected in the last year?
2 times in the last 12 months, with 0 failed results.
Who inspects Rex Hospital Cafeteria?
The Wake County Environmental Services. North Carolina scores each inspection out of 100. Here, 90 or above (grade A) counts as passed, 80 to 89.5 (grade B) as passed with conditions, and below 80 (grade C or lower) as failed. Priority items and CDC risk factors are listed as serious.