Raleigh and Wake County health inspection record1 - Restaurant · 27601
Parkside
301 W Martin St, Raleigh, NC · (984) 232-8969
Did they pass? Yes. Parkside passed its most recent Raleigh health inspection on June 16, 2026.
- Inspections, last 12 months
- 2
- Passed
- 2
- Failed
- 0
- Visits with pests noted
- 1
- Facility type
- 1 - Restaurant
- Record ID
- 04092010851
- Last inspected
- June 16, 2026
The latest inspection, x-rayed
What the inspector found on June 16, 2026
Every inspection, newest first
-
June 16, 2026Passed
- Food separated & protected In cold-hold units throughout; some containers of prepared foods stored under open wire shelving without covers. Food shall be protected from contamination by storing the food in packages; covered containers; or wrappings (if cooling; loosely covered; or uncovered if protected from above contamination). Cover stored food. What this means
- Food-contact surfaces: cleaned & sanitized Ice machine with pink/black microbial film buildup along ice baffle. Ice up to level of the baffle. Soda machine nozzles with black residue accumulation along the rim of the nozzle gaskets. Clean equipment such as ice bins and beverage dispensing nozzles and enclosed components of equipment such as ice makers at a frequency necessary to preclude accumulation of soil or mold. Increase cleaning frequency to these items and clean thoroughly. What this means
- Proper hot holding temperatures (a)(1); priority; hot-holding: at main prep line; mashed potatoes piled high in pan hot-holding at 85F; and grits at 129F. On grill; pan of cooked onions in pan of water holding at 107F. Under heat lamp; tater tots holding at 114F. When asked; PIC stated foods normally not out more than 4 hours; but no actual tphc in place. Maintain hot temperature control for safety (TCS) foods at 135F and above. Verify foods reach the proper final cook or reheat temperatures before placing in hot-holding. Cdi- off-temperature products voluntarily discarded by PIC during inspection. What this means
- Proper cold holding temperatures (a)(2) and (b); priority; cold-holding: in the right prep unit; ham at 44F; stacks of cheese slices at 45F/45F/44.5F; roast beef at 54F. PIC stated the roast beef was recently sliced. Maintain cold temperature control for safety (TCS) foods at 41F and less. Cdi- TCS foods exceeding 41F voluntarily discarded by PIC during inspection; except recently prepped roast beef moved to walk-in for fast-chill. Recommend using metal pans for TCS foods in top section of prep units; and individual lids for pans of chunky foods (ex.-hard boiled eggs; large chunks of meat; stacks of cheese). Recommend keeping TCS foods below the fill line notch of the pans when in the top section of prep units. Cool prepared TCS foods to 41F and less before placing in top section of prep coolers; these spaces are to maintain already cold foods. [repeat] What this means
- Approved thawing methods used Thawing method: packs of steak in large container in food prep sink; submerged in water; water flowing over; but water pool temperature at 82F. Time/temperature control for safety (TCS) foods shall be thawed: under refrigeration that maintains the food temperature at 5c (41F) or less; or completely submerged under running water; at a water temperature of 21c (70F) or below; with sufficient water velocity to agitate and float off loose particles in an overflow; and for a period of time that does not allow thawed portions of a raw animal food requiring cooking to be above 5c (41F); for more than 4 hours including the time the food is exposed to the running water and the time needed for preparation for cooking. Cdi- steaks moved to walk-in cooler. Make sure to check water temperatures in the summer as the cold water may not be cold enough for this method. What this means
- Food properly labeled: original container Labeling missing on a few spices and squeeze bottles of food ingredients. Working containers holding food or food ingredients that are removed from their original packages for use in the food establishment; such as cooking oils; flour; herbs; potato flakes; salt; spices; and sugar shall be identified with the common name of the food. Add labeling to these items. [repeat]
- Personal cleanliness Food employee observed wearing bracelet while working with food. Except for a plain ring such as a wedding band; while preparing food; food employees may not wear jewelry including medical information jewelry on their arms and hands. Educate staff on food code requirements. 2-402.11; core; another food handler observed working with food without wearing a hat or hair net. Food employees shall wear hair restraints such as hats; hair coverings or nets; beard restraints; and clothing that covers body hair; that are designed and worn to effectively keep their hair from contacting exposed food; clean equipment; utensils; and linens; and unwrapped single-service and single-use articles. Ensure food employees wear a hat or hair net.
- Wiping cloths: properly used & stored Damp wiping cloths left out on counters. Cloths in-use for wiping counters and other equipment surfaces shall be held fully submerged between uses in a chemical sanitizer solution at the required concentration (50-200ppm chlorine; or 200-400ppm quat). Cdi- cloths returned for laundering during inspection. What this means
- In-use utensils: properly stored By salad prep; serving utensil stored in water on counter; with water at 85F. Tongs hung low where can brush up against pants at main prep line. During pauses in food preparation or dispensing; food preparation and dispensing utensils shall be stored: in the food with their handles above the top of the food; or in a clean/dry; protected location; or in a container of water if the water is maintained at a temperature of at least 135F and the container is cleaned at a frequency specified in food code (every 4 hours). Cdi- utensils and water pan returned for cleaning during inspection. [repeat] What this means
- Equipment; food & non-food contact surfaces approved; cleanable; properly designed; constructed & used Three spatulas stored as clean with food contact surface pitted and cracked. A few plastic food storage lids stored as clean observed cracked through to food surface. Multiuse food-contact surfaces shall be: smooth; free of breaks; open seams; cracks; chips; inclusions; pits; and similar imperfections. Cdi- damaged spatulas and lids voluntarily discarded during inspection by PIC. [repeat] 4-501.11; core; safety covers are missing from both cooler fans in the walk-in freezer. Long prep table and short side table with rusted lower shelves. Equipment shall be maintained in a state of good repair and condition. Equipment components such as doors; seals; hinges; fasteners; and kick plates shall be kept intact; tight; and adjusted in accordance with manufacturers specifications. Replace the rusty racks/carts. Put the fan safety covers back on. What this means
- Warewashing facilities: installed; maintained & used; test strips PIC unable to locate test kit for the sanitizer in use (sink and surface quat). A test kit or other device that accurately measures the concentration in mg/l of sanitizing solutions shall be provided. Vr-verification required. Obtain a sanitizer test kit for the sanitizer in use (sink and surface quat) within 10 days and text picture of obtained sanitizer test kit to your rehs joanne rutkofske at 919-623-0459 for verification that correction completed. What this means
- Non-food contact surfaces clean Smallwares bin with residue/debris accumulation. Multiple wire racks/carts throughout with residue accumulation. Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. Smallwares and bin returned to dish area for cleaning during inspection. Clean these items thoroughly. [repeat] What this means
- Physical facilities installed; maintained & clean Floor grout worn down in spots throughout kitchen and some floor tile damage throughout with pooled water. Floor drain cover sunk sideways down into the drain right at the main prep line creating a trip hazard. Physical facilities shall be maintained in good repair. Repair the flooring so smooth and cleanable. [repeat] 6-201.11; core; drink machine syrup boxes room has unfinished drywall walls. Wall behind the smallwares storage rack has wall damage with some of the wall surface gone. Floors; floor coverings; walls; wall coverings; and ceilings shall be designed; constructed; and installed so they are smooth and easily cleanable. Maintain floor; walls and ceiling in good repair. Repair the wall damage. Install rfp board or other approved restaurant wall surface in the soda syrups room. [repeat] What this means
-
February 25, 2026Passed
- Proper cold holding temperatures (a)(2) and (b); priority; cold-holding: at the wall prep unit; hard boiled eggs overstacked in pan; measured at 45F in the top portion; 36F down lower in pan. Maintain cold temperature control for safety (TCS) foods at 41F and less. Cdi- TCS foods exceeding 41F voluntarily discarded by PIC during inspection. Recommend using metal pans for TCS foods in top section of prep units; and individual lids for pans of chunky foods (ex.-hard boiled eggs; large chunks of meat; stacks of cheese). Recommend keeping TCS foods below the fill line notch of the pans when in the top section of prep units. Cool prepared TCS foods to 41F and less before placing in top section of prep coolers; to then maintain the cold temperature. What this means
- Toxic substances properly identified stored & used Labeling missing on all kitchen buckets of sanitizer. Working containers used for storing poisonous or toxic materials such as cleaners and sanitizers taken from bulk supplies shall be clearly and individually identified with the common name of the material. Cdi- labeling added during inspection. What this means
- Food properly labeled: original container Labeling missing on a few spices and squeeze bottles of food ingredients. Working containers holding food or food ingredients that are removed from their original packages for use in the food establishment; such as cooking oils; flour; herbs; potato flakes; salt; spices; and sugar shall be identified with the common name of the food. Add labeling to these items.
- In-use utensils: properly stored Multiple knifes at prep unit stored wedged in soiled space between pieces of equipment. During pauses in food preparation or dispensing; food preparation and dispensing utensils shall be stored: in the food with their handles above the top of the food; or in a clean/dry; protected location; or in a container of water if the water is maintained at a temperature of at least 135F and the container is cleaned at a frequency specified in food code (every 4 hours). Cdi- utensils returned for cleaning during inspection. What this means
- Single-use & single-service articles: properly stored & used (a) and (c); core; a few stacks of unwrapped uncovered single-service containers stored food-side up. Single-service and single-use articles shall be kept in the original protective package or stored by using other means that afford protection from contamination until used. Cdi- containers inverted onto sides during inspection.
- Equipment; food & non-food contact surfaces approved; cleanable; properly designed; constructed & used Three spatulas stored as clean with food contact surface pitted and cracked. Multiple plastic food storage lids stored as clean observed cracked through to food surface. Multiuse food-contact surfaces shall be: smooth; free of breaks; open seams; cracks; chips; inclusions; pits; and similar imperfections. Cdi- damaged spatulas and lids voluntarily discarded during inspection by PIC. 4-205.10; core; cuisinart food processor labeled for household use only. Except for toasters; stand mixers; microwave ovens; water heaters; and hoods; food equipment shall be used in accordance with the manufacturers intended use and certified or classified for sanitation by an american national standards institute (ansi)-accredited certification program. Remove the food processor; obtain a commercial grade one. 4-501.11; core; safety covers are missing from both condenser fans in the walk-in freezer. Rusted wire racks/carts throughout kitchen. Long prep table with rusted lower shelf. Equipment shall be maintained in a state of good repair and condition. The tall 2-door reach-in cooler across from salad prep is broken; PIC stated part already on order for this item. Equipment components such as doors; s What this means
- Non-food contact surfaces clean Wall shelf above salad prep unit holding unwrapped single-service items observed with dust/residue accumulation. Multiple wire racks/carts throughout with residue accumulation. Nonfood-contact surfaces of equipment shall be cleaned at a frequency necessary to preclude accumulation of soil residues. Clean these items thoroughly. What this means
- PestsGarbage & refuse properly disposed; facilities maintained Grease receptacle with heavy oily residue buildup along top and sides of container and along the ground around the container. Soiled receptacles and waste handling units for refuse; recyclables; and returnables shall be cleaned at a frequency necessary to prevent them from developing a buildup of soil or becoming attractants for insects and rodents. Increase cleaning frequency to this area; using dry cleaning methods (ex.-paint scraper; paper towels; kitty litter; flat shovel) so not washing oily water into drainage systems. What this means
- Physical facilities installed; maintained & clean Floor grout worn down in spots throughout kitchen and some floor tile damage throughout. Floor drain cover sunk sideways down into the drain right at the main prep line creating a trip hazard. In ladies restroom; open hole in the wall. Physical facilities shall be maintained in good repair. Repair the flooring so smooth and cleanable. [repeat] 6-201.11; core; drink machine room has unfinished walls and some wall damage behind the rack. Floors; floor coverings; walls; wall coverings; and ceilings shall be designed; constructed; and installed so they are smooth and easily cleanable. Maintain floor; walls and ceiling in good repair. 6-501.12; core; sticky residue accumulation along floors in the soda room. Physical facilities shall be cleaned as often as necessary to keep them clean. Increase cleaning frequency to these areas and clean thoroughly. What this means
From the Wake County Environmental Services, published as Wake County Open Data, Restaurant Inspections. Text is the inspector's, shortened only for length. North Carolina scores each inspection out of 100. Here, 90 or above (grade A) counts as passed, 80 to 89.5 (grade B) as passed with conditions, and below 80 (grade C or lower) as failed. Priority items and CDC risk factors are listed as serious.
Questions
Did Parkside pass its health inspection?
Yes. Parkside passed its most recent Raleigh health inspection on June 16, 2026.
How many times was Parkside inspected in the last year?
2 times in the last 12 months, with 0 failed results and 1 visit where the inspector noted pests.
Who inspects Parkside?
The Wake County Environmental Services. North Carolina scores each inspection out of 100. Here, 90 or above (grade A) counts as passed, 80 to 89.5 (grade B) as passed with conditions, and below 80 (grade C or lower) as failed. Priority items and CDC risk factors are listed as serious.