North Carolina health inspection recordRestaurant · 28392
Compass/Canteen
15855 Hwy 87w, Tarheel, NC
Did they pass? Yes. Compass/Canteen passed its most recent North Carolina health inspection on August 11, 2026.
- Inspections, last 12 months
- 3
- Passed
- 3
- Failed
- 0
- Visits with pests noted
- 0
- Facility type
- Restaurant
- Record ID
- 5009010351
- Last inspected
- August 11, 2026
The latest inspection, x-rayed
What the inspector found on August 11, 2026
Every inspection, newest first
-
August 11, 2026Passed
- SeriousHandwashing sinks supplied & accessible Hand washing sinks are not accessible in food preparation areas located near produce sink and at dessert making area. Site plan had been submitted. Plan has been approved. Hand washing sink is ready to be installed. Please have plumber contact building inspections for proper permits once sink has been installed. (Repeat finding.) What this means
- SeriousProper hot holding temperatures 3-501.16 (a) (1) time / temperature control for safety food, hot and cold holding (p): hot holding food must be held at 135°F until served. Hot holding foods temping less than 135°F on serving line. See temperature observations. Cdi-PIC voluntarily discarded pork chops from serving line. (Repeat finding.) Corrected during the inspection. What this means
- Wiping cloths: properly used & stored Sanitizer not prepared for storage of wet wiping cloths. Cdi- PIC prepared sanitizer solution. Had discussion with PIC on storing wet cloths in detergent. What this means
- Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used 4-501.11 good repair and proper adjustment - equipment (c): door gaskets need to be replaced on walk-in cooler, in walk-in freezer, on hot holding door gaskets. Condenser pipes need to be wrapped inside wall-in units. Both walk-in cooler and freezer has a gap at bottom of door that needs to be repaired. Excessive amount of condensation in walk-in freezer. Floors and walls in both walk-ins need to be properly repaired- floors are not smooth, non-absorbent and easily cleanable. Both walk-in cooler and freezer doors are damaged with signs of deterioration around doors on units. Food preparation tables need replacing when bottom shelf is rusted-table near office. Fp table with metal sheet near meat slicer needs replacing. Metal wire racks in dry storage room are rusting. Missing knobs need replacing on stove/oven. Stove at the end of hood system and ice machine need to be working properly. (Repeat finding.) What this means
- Non-food contact surfaces clean 4-601.11 (b) and (c) equipment, food-contact surfaces, nonfood contact surfaces, and utensils (c) : racks storing clean utensils, racks inside walk-in cooler, walk-in freezer, inside bottom of hh cabinet, dry food racks in storage room and in kitchen, equipment under hood system, inside cabinets under dessert preparation table, and condenser in walk-in unit needs additional cleaning. Remove laser film inside cabinet at dessert prep area. (Repeat finding.) What this means
- Physical facilities installed, maintained & clean 6-501.12 cleaning, frequency and restrictions (c): additional cleaning is needed on floors and walls throughout facility including inside walk-in units and in restrooms. Hood system needs additional cleaning. 6-501.11 repairing - premises, structures, attachments, and fixtures - methods (c): floors are rusting inside walk-in units- absorbent. Floor needs to be sealed for easy cleaning. Floor is worn and damaged in some areas in kitchen and needs repairing. Wall in dry storage room is damaged and is separating. Perforated acoustic ceiling tiles not approved in closet storing can wash, restrooms, and in some areas 6-501.114 maintaining premises, unnecessary items and litter (c): remove unused or damaged equipment that is not in use from premises. (Repeat finding.) What this means
- Meets ventilation & lighting requirements; designated areas used 6-303.11 intensity: lighting intensity measured at 44 fc at rte fp table, 36 fc at raw fp table, 8 fc in women’s stall in restroom, 32-50 fc at dessert prep table, and 22 -48 fc under hood system at work surfaces, and 43 fc above slicer. At least 50 foot candles of shielded lighting is needed at fp tables or where food is prepped. At least 20 fc is needed in restrooms. Bulbs need replacing under hood system. (Repeat finding.)
-
April 9, 2026Passed
- SeriousHandwashing sinks supplied & accessible Hand washing sinks are not accessible in food preparation areas located near produce sink and at dessert making area. Please provide site plan by 4/10/26. Handwashing sink needs to be repaired in men’s restroom. What this means
- SeriousFood-contact surfaces: cleaned & sanitized Meat prep sink, produce prep sink, spatula, shield in ice machine and ice scoop/ice holder is visibly soiled. Cdi-PIC had all locations clean and sanitized. Spatula placed at three comp sink. Corrected during the inspection. What this means
- SeriousProper hot holding temperatures 3-501.16 (a) (1) time / temperature control for safety food, hot and cold holding (p): hot holding food must be held at 135°F until served. Hot holding foods temping less than 135°F on serving line and in hot holding case. Cdi-PIC voluntarily discarded smoked sausage from serving line and patty sausage from hot holding cabinet. (Repeat finding.) Corrected during the inspection. What this means
- SeriousProper cold holding temperatures Cold foods temping above 41°F at create station. Cdi-had discussion with PIC on cooling items to 41° F or less before transferring to cold display unit at create station. Sliced tomatoes and lettuce has been on display for 30 minutes per employee. Items were placed in walk-in freezer to cool. Corrected during the inspection. What this means
- SeriousProper date marking & disposition Observed chicken breast dated marked 3/30 thru 4/29 and ham 3/27 thru 3/31 in walk-in cooler. Cdi-PIC voluntarily discarded ham and chicken. Observed no date marking on potato salad and pasta salad in 2 door cooler. Cdi-items prepped yesterday were date marked not to exceed 7 days. Corrected during the inspection. What this means
- Contamination prevented during food preparation, storage & display Bread stored under condensation leaking from condenser lines in walk-in freezer. Cdi-PIC relocated bread. Corrected during the inspection. What this means
- In-use utensils: properly stored Observed utensil handles stored in food at create station.
- Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used 4-501.11 good repair and proper adjustment - equipment (c): door gaskets need to be replaced on walk-in cooler and in walk-in freezer. Condenser pipes need to be wrapped inside wall-in units. Both walk-in cooler and freezer has a gap at bottom of door that needs to be repaired. Excessive amount of condensation in walk-in freezer. Floors in both walk-ins need to be properly repaired- floors are not smooth, non-absorbent and easily cleanable. Both walk-in cooler and freezer doors are damaged with signs of deterioration around doors on units. Food preparation tables need replacing when bottom shelf is rusted. Fp table with metal sheet near meat slicer needs replacing. Metal wire racks in dry storage room are rusting. Missing knobs need replacing on stove/oven. Hh cabinet door is busted and needs replacing. (Repeat finding.) What this means
- Non-food contact surfaces clean 4-601.11 (b) and (c) equipment, food-contact surfaces, nonfood contact surfaces, and utensils (c) : racks storing clean utensils, inside bottom of hh cabinet, dry food racks in storage room, sides of equipment (fryers), inside cabinets under dessert preparation table, and condenser in walk-in unit needs additional cleaning. (Repeat finding.) What this means
- Physical facilities installed, maintained & clean 6-501.12 cleaning, frequency and restrictions (c): additional cleaning is needed on floors and walls throughout facility including inside walk-in units and in restrooms. Hood system needs additional cleaning. 6-501.11 repairing - premises, structures, attachments, and fixtures - methods (c): floors are rusting inside walk-in units- absorbent. Floor needs to be sealed for easy cleaning. Floor is worn and damaged in some areas in kitchen and needs repairing. Wall in dry storage room is damaged and is separating. Perforated acoustic ceiling tiles not approved in closet storing can wash, restrooms, and in some areas in kitchen. (Repeat finding.) What this means
- Meets ventilation & lighting requirements; designated areas used 6-303.11 intensity: lighting intensity measured at 44 fc at rte fp table, 36 fc at raw fp table, 8 fc in women’s stall in restroom, 32-50 fc at dessert prep table, and 22 -48 fc under hood system at work surfaces, and 43 fc above slicer. At least 50 foot candles of shielded lighting is needed at fp tables or where food is prepped. At least 20 fc is needed in restrooms. Lighting has increased in some areas. (Repeat finding.)
-
January 20, 2026Passed
- SeriousProper hot holding temperatures 3-501.16 (a) (1) time / temperature control for safety food, hot and cold holding (p): hot holding food must be held at 135°F until served. Hot holding food (patty sausage) stored on serving line is temping less than 135°F. Cdi-PIC removed sausage from serving line and voluntarily discarded sausage Corrected during the inspection. What this means
- Proper cooling methods used; adequate equipment for temperature control Observed large pan of chopped lettuce and diced tomatoes tightly covered that was recently chopped in 2 door cooler. Cdi-PIC voluntarily relocated pans of produce to walk-in freezer to cool before placing on serving line. Corrected during the inspection. What this means
- Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used 4-501.11 good repair and proper adjustment - equipment (c): door gaskets need to be replaced on hh cabinet located at create station, walk-in cooler, and in walk-in freezer. Condenser pipes need to be wrapped inside wall-in units. Both walk-in cooler and freezer has a gap at bottom of door that needs to be repaired. Excessive amount of condensation in walk-in freezer. Floors in both walk-ins need to be properly repaired- floors are not smooth, non-absorbent and easily cleanable. Both walk-in cooler and freezer doors are damaged with signs of deterioration around doors on units. Food preparation tables need replacing when bottom shelf is rusted ( fp table across from 2 door cooler). Fp table with metal sheet near meat slicer needs replacing. Metal wire racks in dry storage room are rusting. Missing knobs need replacing on stove/oven. Hh cabinet door is cracked and needs replacing. (Repeat finding.) What this means
- Non-food contact surfaces clean 4-601.11 (b) and (c) equipment, food-contact surfaces, nonfood contact surfaces, and utensils (c) : racks storing clean utensils, inside bottom of hh cabinet, dry food racks need additional cleaning, under serving lines, inside metal tray where dishes have been air drying below mechanical box, condenser in walk-in unit needs additional cleaning. (Repeat finding.) What this means
- Garbage & refuse properly disposed; facilities maintained Observed accumulation of debris around dumpster receptacles. Area must be kept clean and free of refuse to prevent pest attraction. What this means
- Physical facilities installed, maintained & clean 6-501.12 cleaning, frequency and restrictions (c): additional cleaning is needed on floors and walls throughout facility including inside walk-in units and in restrooms. Hood system needs additional cleaning. 6-501.11 repairing - premises, structures, attachments, and fixtures - methods (c): floors are rusting inside walk-in units- absorbent. Floor needs to be sealed for easy cleaning. Floor is worn and damaged in some areas in kitchen and needs repairing. Wall in dry storage room is damaged and is separating. Perforated acoustic ceiling tiles not approved in closet storing can wash, restrooms, and in some areas in kitchen. (Repeat finding.) What this means
- Meets ventilation & lighting requirements; designated areas used 6-303.11 intensity: lighting intensity measured at 44 fc at rte fp table, 36 fc at raw fp table, 8 fc in women’s stall in restroom, 32-50 fc at dessert prep table, and 22 -48 fc under hood system at work surfaces, and 43 fc above slicer. At least 50 foot candles of shielded lighting is needed at fp tables or where food is prepped. At least 20 fc is needed in restrooms. Lighting has increased in some areas. (Repeat finding.)
From the North Carolina county environmental health offices, published as North Carolina environmental health public inspections portal. Text is the inspector's, shortened only for length. North Carolina scores food places out of 100: A is 90 or more, B is 80 to 89.5, C is 70 to 79.5, and below 70 the permit is pulled. Here, an A counts as passed, a B or C as passed with conditions, and below 70 as failed. Child care centers and some other places get no grade; for those, an inspection with items cited counts as passed with conditions. Items 1 to 29 are the foodborne illness risk factors and are listed as serious.
Questions
Did Compass/Canteen pass its health inspection?
Yes. Compass/Canteen passed its most recent North Carolina health inspection on August 11, 2026.
How many times was Compass/Canteen inspected in the last year?
3 times in the last 12 months, with 0 failed results.
Who inspects Compass/Canteen?
The North Carolina county environmental health offices. North Carolina scores food places out of 100: A is 90 or more, B is 80 to 89.5, C is 70 to 79.5, and below 70 the permit is pulled. Here, an A counts as passed, a B or C as passed with conditions, and below 70 as failed. Child care centers and some other places get no grade; for those, an inspection with items cited counts as passed with conditions. Items 1 to 29 are the foodborne illness risk factors and are listed as serious.