DidTheyPass
North Carolina health inspection record
Food inspection recordNorth Carolina county environmental health offices

Restaurant · 28462

Bojangles #913

11 Ocean Hwy East, Supply, NC

PassedOctober 19, 2026

Did they pass? Yes. Bojangles #913 passed its most recent North Carolina health inspection on October 19, 2026.

Inspections, last 12 months
3
Passed
3
Failed
0
Visits with pests noted
0
Facility type
Restaurant
Record ID
7010011378
Last inspected
October 19, 2026
Data source
North Carolina environmental health public inspections portal

The latest inspection, x-rayed

What the inspector found on October 19, 2026

Every inspection, newest first

  1. October 19, 2026Passed

    Score 90.5, grade A · Inspection · score 90.5 · grade A

    • SeriousProper eating, tasting, drinking or tobacco use (repeat) observed employee's personal beverage cup stored on top of dry storage rack and flour bag. Cdi by PIC voluntarily disposing of drinks. Employee food observed above tea in the front 1-door worktop cooler. (Repeat finding.) Corrected during the inspection.
    • SeriousHandwashing sinks supplied & accessible 6-301.12 - hand drying provision: provide paper towels or approved alternative for hand drying at each handsink. Pf observed that there were no hand towels to dry hands at one hand wash sink behind the large ice machine. Cdi by PIC placing hand towels at the sink. Corrected during the inspection. What this means
    • SeriousFood-contact surfaces: cleaned & sanitized Pf [repeat] several deep metal food pans were found stored away as cleaned and ready for use, but were still soiled with dried food residue and in some cases large pieces of food debris. Additionally, several plastic tubs used for holding chicken were found with food debris present. Cdi by PIC moving all those pans to be thoroughly rewashed, rinsed, and sanitized. Clean the mixer in the chicken walk in cooler for debris. (Repeat finding.) Corrected during the inspection. What this means
    • SeriousProper hot holding temperatures 3-501.16 - potentially hazardous food (time/temperature control for safety food), hot and cold holding: maintain TCS foods in hot holding at 135F or above. P gravy observed hot holding on makeline steam table found between 124-140F. PIC states it was made this morning with hot water then placed into the steam table around 6am. Once mixed, portions of the gravy were still below 135F. Therefore, cdi by PIC voluntarily disposing and remaking. Egg and sausage along with plain sausage sandwiches were found at the makeline pre-portioned but not properly hot holding. PIC states it is not normal procedure to keep as large a number as was present, but that these are kept hot at 135F. Cdi by PIC using these within an hour. Corrected during the inspection. What this means
    • Proper cooling methods used; adequate equipment for temperature control 4-301.11 - cooling, heating, and holding capacities: provide equipment in number and capacity so that cooling, heating, and holding temperatures are achieved. Pf the drawer cooler and chicken breading cooler are not operational today. Instead, PIC states the items normally stored here are being kept in the walk in cooler. Cold holding temperatures were found correctly maintained during inspection. However, to prevent stress on remaining equipment. These coolers must be repaired by 10/29/26 and call dana cavenaugh at 910-253-1721 when done. What this means
    • Insects & rodents not present; no unauthorized animals Observed a few areas where dead bugs were on the ground and had not been swept including the oil disposal, dry storage, and dish pit. What this means
    • Wiping cloths: properly used & stored 3-304.14 - wiping cloths, use limitation: hold in-use wiping cloths in sanitizer between uses. Wiping cloths in a sanitizer bucket were found at a concentration of 0ppm. Rehs found a label stating the bucket had been made the day prior. What this means
    • In-use utensils: properly stored 3-304.12 - in-use utensils, between-use storage: store in-use utensils in a clean, dry place, in food with handles out, in 135F or greater water or in running water which quickly moves food particles to the drain. Scoop for flour was found fallen into the food. What this means
    • Utensils, equipment & linens: properly stored, dried & handled 4-901.11(a) - equipment and utensils, air-drying required: air dry equipment and utensils after cleaning and sanitizing. [repeat] observed many deep metal food pans still wet after being washed, nested together, and stacked away ready for use. Fully air dry all washed equipment and utensils before stacking them away together. Cdi by having all wet pans found to be returned to utensil wash sink to be rewashed, sanitized, and air dry process restarted. Do not stack washed pans together until first fully air dried. (Repeat finding.) Corrected during the inspection. What this means
    • Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used Replace the shelving in the main walk-in cooler that has paint coating that is peeling and flaking off. Pf white plastic container used for breading chicken was found with broken corners and cracks along the bottom. Replace this container by 10/29/26 and call dana cavenaugh at 910-253-1721. (Repeat finding.) What this means
    • Non-food contact surfaces clean - c [repeat] detail clean door gaskets of reach-in coolers. Detail clean shelving and dunnage racks in main walk-in cooler. Detail clean grease residue build-up from inside and outside surfaces of fryers. Clean fallen trash and drink residue build-up from inside of cabinets and from shelving inside of those same cabinets underneath customer self-serve drink station. Clean dust and flour accumulation from shelving installed over biscuit prep cooler and also from the biscuit storage rack to the right of the biscuit prep cooler. Clean residue build-up from utensil air drying shelving to left of utensil wash sink. (Repeat finding.) What this means
    • Plumbing installed; proper backflow devices P observed open water spray nozzle attached to water hose installed on faucet fixture at service sink by back door and was down in and below the flood rim level of the service sink (mop sink). Cdi by the hose being lifted and hung up so that the hose end was not below the flood rim level. (Repeat finding.) Corrected during the inspection. What this means
    • Physical facilities installed, maintained & clean [repeat] clean debris and residue build-up from floor surface underneath equipment, especially at cookline, under ice machine, under reach-in coolers, in cabinets under self-serve drink station, etc..... Clean accumulated dust, mold, and grease residue from hvac air vents in kitchen and surrounding ceiling tiles. Clean splattered food residue from wall surface in main walk-in cooler. Clean the fryer hood and biscuit hood. [repeat] replace broken, cracked, and chipped floor tiles in kitchen like those in front of fryers and throughout rest of kitchen. Reseal between wall surface and hand wash sinks in kitchen and restrooms where old caulking is cracked and peeling from wall. Grout tiles in the kitchen to be smooth and not allow water pooling. Ceiling tiles next to ice machine must be replaced to be smooth and easily cleanable. Some base tiles have been lost or removed across kitchen or in the wic. Replace to have a smooth coving. (Repeat finding.) What this means
    • Meets ventilation & lighting requirements; designated areas used 6-303.11 intensity - lighting (c) [repeat] replace bulbs with leds. Today light intensity was measured and found to be reduced due to the blown light bulbs. The light intensity measured today as follows in the noted areas: 35 to 42 fc over food prep sink and 31 fc over grill and 2fc in main walk in cooler. Replace all blown lights. (Repeat finding.)
  2. May 4, 2026Passed

    Score 91.5, grade A · Inspection · score 91.5 · grade A

    • SeriousProper eating, tasting, drinking or tobacco use Observed employee's personal beverage cup stored on top shelf surface over dry food items stored on bottom shelf below underneath steam table to left of to-go window. Cdi by PIC moving the beverage cup to the bottom shelf. Do not store personal beverage cups over any food, equipment, or food contact surfaces. (Repeat finding.) Corrected during the inspection. What this means
    • SeriousFood separated & protected P in drawer cooler, a raw pork bacon was found stored in same pan as precooked smoked sausage links. Cdi by PIC reorganizing the foods so that they were each in separate pans. Do not store raw meats in same pan as precooked foods. Corrected during the inspection. What this means
    • SeriousFood-contact surfaces: cleaned & sanitized Pf [repeat] several deep metal food pans were found stored away as cleaned and ready for use, but were still soiled with dried food residue and in some cases large pieces of food debris. Cdi by requiring those pans to be thoroughly rewashed, rinsed, and sanitized. Thoroughly clean all food contact utensils prior to storing them away as clean and ready for use. The PIC was reminded that they must be cleaned at least once per day. (Repeat finding.) Corrected during the inspection. What this means
    • SeriousProper date marking & disposition 3-501.17 - ready-to-eat, potentially hazardous food (time/temperature control for safety food), date marking: date mark all TCS foods that are ready-to-eat once opened or prepared and held more than 24hrs. Pf all ready-to-eat foods that had ben pre-portioned were found date marked except for two small containers of slaw in 1 door work top cooler under front counter. Cdi by PIC immediately voluntarily disposing of those to waste. Corrected during the inspection. What this means
    • Food properly labeled: original container 3-302.12 - food storage containers, identified with common name of food: label all working containers of food (oils, spices, salts) except food that is easy to identify such as dry pasta. (c ) during inspection 1 bulk container of flour was found unlabeled. Keep all dry food containers labeled to identify contents. Cdi by PIC labeling the container.
    • Insects & rodents not present; no unauthorized animals 6-202.15 - outer openings, protected: protect outer openings of establishment from insect or rodent entry. The self-close device of the to-go window is not working and must be repaired to properly self-close after each use. What this means
    • Utensils, equipment & linens: properly stored, dried & handled 4-901.11(a) - equipment and utensils, air-drying required: air dry equipment and utensils after cleaning and sanitizing. [repeat] observed many deep metal food pans still wet after being washed, nested together, and stacked away ready for use. Fully air dry all washed equipment and utensils before stacking them away together. Cdi by having all wet pans found to be returned to utensil wash sink to be rewashed, sanitized, and air dry process restarted. Do not stack washed pans together until first fully air dried. (Repeat finding.) Corrected during the inspection. What this means
    • Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used Replace the shelving in the main walk-in cooler that has paint coating that is peeling and flaking off. Replace door gaskets that are either torn or starting to tear on the following cooler doors: prep top cooler, bottom door of true double door upright reach-in freezer to right of fryers, and both doors of the biscuit prep cooler. (note: PIC stated that the door gaskets are already on order). What this means
    • Non-food contact surfaces clean - c [repeat] detail clean door gaskets of reach-in coolers. [repeat] detail clean shelving and dunnage racks in main walk-in cooler. [repeat] clean accumulated dust on cooling coils of cooling unit in main walk-in cooler. [repeat] detail clean grease residue build-up from inside and outside surfaces of fryers. [repeat] clean fallen trash and drink residue build-up from inside of cabinets and from shelving inside of those same cabinets underneath customer self-serve drink station. Clean dust and flour accumulation from shelving installed over biscuit prep cooler and also from the biscuit storage rack to the right of the biscuit prep cooler. Clean residue build-up from utensil air drying shelving to left of utensil wash sink. (Repeat finding.) What this means
    • Plumbing installed; proper backflow devices P observed open water spray nozzle attached to water hose installed on faucet fixture at service sink by back door and was down in and below the flood rim level of the service sink (mop sink). Cdi by the hose being lifted and hung up so that the hose end was not below the flood rim level. Corrected during the inspection. What this means
    • Physical facilities installed, maintained & clean [repeat] clean debris and residue build-up from floor surface underneath equipment, especially at cookline, under ice machine, under reach-in coolers, in cabinets under self-serve drink station, etc.... [repeat] clean accumulated dust, mold, and grease residue from hvac air vents in kitchen and surrounding ceiling tiles. Clean splattered food residue from wall surface in main walk-in cooler and next to hand wash sink and biscuit prep station. [repeat] replace broken, cracked, and chipped floor tiles in kitchen like those in front of fryers and throughout rest of kitchen. [repeat] reseal between wall surface and hand wash sinks in kitchen and restrooms where old caulking is cracked and peeling from wall. (Repeat finding.) What this means
    • Meets ventilation & lighting requirements; designated areas used 6-303.11 intensity - lighting (c) [repeat for blown lights over food prep areas reducing light intensity] replace the burned out light bulbs in the light fixture over the food prep sinks and in the hood vent over the grill. Today light intensity was measured and found to be reduced due to the blown light bulbs. The light intensity measured today as follows in the noted areas: 35 to 42 fc over food prep sink and 31 fc over grill. Replace all blown lights. (Repeat finding.)
  3. January 12, 2026Conditional

    Score 84, grade B · Inspection · score 84 · grade B

    • SeriousPIC present, demonstrates knowledge, & performs duties Pf today several priority violations were noted during the inspection. The PIC is required to demonstrate their required knowledge by having no violations of priority (p) items of which today there were several noted (ex: cold holding, reheating, food contact surfaces being properly cleaned, hot holding, etc...). Also, the PIC is required to educate and inform all employees of the details of the required employee health policy agreement, but today one employee was noted to no be able to recall the applicable policy details when asked, was unable to tell where the policy could be found, and when the PIC was asked about the matter it was found that the noted employee had not signed any copy of the policy to verify that they had been informed at the time of being hired. Cdi by reviewing with PIC the list of required items for which they are responsible. Also gave PIC an educational handout entitled "2.102.11 demonstration of knowlewdge" which listed all questions and topics that the PIC must be able to answer and be knowledge of, and which includes information for which they (the PIC) are responsible for training the other employees on. Last, the PIC is required to take the time to an What this means
    • SeriousCertified food protection manager No certified food protection manager on duty today with a valid certificate. What this means
    • SeriousManagement, food & conditional employee; knowledge, responsibilities & reporting 2-103.11 - person in charge: ensure food employees are informed of their responsibility to report required symptoms, illnesses and exposure. Pf during inspection an employee who had worked at the restaurant about one month was questioned about knowledge of applicable diagnosed foodborne illnesses and symptoms. The employee was not able to share much by way of memory about the details of the required employee health policy agreement and was unaware of where it may be posted in the restaurant to retrieve the information if needed. The manager who showed up at the end of the inspection was asked about the matter and was unable to show any copy of the required policy to indicate where the same employee had signed to prove he had been made aware of the policy details, though approved copies of the policy were available for review and inspection to show that other employees had been informed. Cdi by having the manager stopping and educating the same employee on the details of the policy so that she could have him sign a copy of the policy. Make certain that all employees are made aware of all required details of the employee health policy agreement. Corrected during the inspection. What this means
    • SeriousProper eating, tasting, drinking or tobacco use Observed PIC's personal beverage cup stored on table surfaces over the reach-in cooler to the left of the to-go window. Cdi by PIC moving the beverage cup to a nearby bottom shelf. Do not store persinal beverage cups over any food, equipment, or food contact surfaces. Corrected during the inspection. What this means
    • SeriousFood-contact surfaces: cleaned & sanitized Pf [repeat] several deep metal food pans, a colander, some food scoops were found stored away as cleaned and ready for use, but were still soiled with dried food residue. Cdi by requiring those pans to be thoroughly rewashed, rinsed, and sanitized. Thoroughly clean all food contact utensils prior to storing them away as clean and ready for use. (Repeat finding.) Corrected during the inspection. What this means
    • SeriousProper reheating procedures for hot holding 3-403.11 - reheated for hot holding: reheat all TCS foods to 165F within 2 hours if food is to be hot held until service. P today macaroni cheese was found being slowly reheated on the steam table to the left of the to-go window after first having been partly reheated in a pot on the stove. The temperature in the center of the food item was only 48F. Cdi by it being reheated in a pot on stove and when rechecked was 175F. Also, a temporary nemco food warmer was observed put into use on a metal cart stored behind the pos at the front counter. The warmer was said to be placed there temporarily to hot hold foods. Green beans found slowly reheating in that device were only 103F and the pinto beans were only 102F. It was found that the warmer was not even plugged in. Cdi by PIC plugging in the device and moving the beans to pots on the stove to quickly reheat to over 165F. Corrected during the inspection. What this means
    • SeriousProper hot holding temperatures 3-501.16 - potentially hazardous food (time/temperature control for safety food), hot and cold holding: maintain TCS foods in hot holding at 135F or above. P cooked egg observed hot holding in the hot hold device used to hold cooked bo's chicken was checked and was only 113F. Cdi by employee voluntarily disposing of the egg to waste and cooking more eggs. Observed that the main hot hold steam table is no longer properly working and is not able to be used which is creating a problem with ample hot hold space for prepared foods. It was also noted that the steam table at the front counter is not working either and was therefore not able to be in use to help hot hold foods. Though the smaller steam table (with four spaces) is available for use to the left of the to-go window, no other steam table space is available. One attempt to help with this problem was by the addition of a temporary nemco food warmer which has space for 3 pans, but when observed in use was found to not even be plugged in. Therefore, the deletion of the main steam table and the steam table at the front counter from available use for the hot holding of foods is creating hot hold violations due to lack of ample hot h What this means
    • SeriousProper cold holding temperatures 3-501.16 - potentially hazardous food (time/temperature control for safety food), hot and cold holding: maintain TCS foods in cold holding at 41F or less. P [repeat for cold holding] temperatures of the prepared breading batter dip stored at the bo's chicken breading station was found holding at only 55F. The dip had been placed there within the last 30 minutes prior to first being checked. Cdi by employee adding ice underneath the pan holding the dip (the actual cooler itself does not work and needs service). Raw chicken products (bo's bites and bo's sandwich filets) also stored there were found in covered containers and were all holding at 35F, though it must be pointe out that they had just been moved from the properly functioning walk-in chicken cooler which explained their separate colder temperatures when compared to the batter dip, but no ice had yet been added underneath the pans holding the raw chicken which, in time, would also lead to cold holding violations if not corrected. Cdi by ample amounts of ice being added underneath all pans to maintain the temperature of all products held there to be 41 for colder. Maintain all cold holding at 41F or colder. Have the noted coo What this means
    • Utensils, equipment & linens: properly stored, dried & handled 4-901.11(a) - equipment and utensils, air-drying required: air dry equipment and utensils after cleaning and sanitizing. [repeat] observed many deep metal food pans still wet after being washed, nested together, and stacked away ready for use. Fully air dry all washed equipment and utensils before stacking them away together. Cdi by having all wet pans found to be returned to utensil wash sink to be rewashed, sanitized, and air dry process restarted. Do not stack washed pans together until first fully air dried. (Repeat finding.) Corrected during the inspection. What this means
    • Equipment, food & non-food contact surfaces approved, cleanable, properly designed, constructed & used Repair the main steam table in kitchen and the steam table at the front counter to properly hot hold foods at 135F at all times. Repair the beverage air 1 door reach-in cooler at the chicken breading station to properly cold hold foods at 41F at all times. Repair these pieces of equipment within 10 days from today's inspection (see violation #21 & 22 for added details). Pf [repeat] observed that the large table top turn-handle can opener requires a screw driver to remove the piercing blade (food contact surface) in order to properly clean it which makes it not easily cleanable. The noted can opener is no longer considered approved being that it requires a tool to disassemble it to allow for proper cleaning. When replacing the can opener, you must replace it with one that is approved. Discussed with PIC options for approved can openers of the same design (one that has a pull pin to allow the blade to be very easily removed for cleaning). (Repeat finding.) What this means
    • Non-food contact surfaces clean - c [repeat] detail clean door gaskets of reach-in coolers. Clean residue build-up from inside of the beverage air 1 door reach-in cooler at the chicken breading station. [repeat] detail clean shelving and dunnage racks in main walk-in cooler and also in the walk-in chicken cooler. [repeat] detail clean grease residue build-up from inside and outside surfaces of fryers. [repeat] clean grease build-up from wheels of all equipment (ex: fryers, grill, reach-in coolers and freezers, etc..) [repeat] clean fallen trash and drink residue build-up from inside of cabinets underneath customer self-serve drink station. [repeat] clean dust from cooling coils of cooling unit in walk-in cooler and as well from cooling coils of the beverage air 1 door reach-in cooler at the chicken breading station. Clean residue build-up from shelving to left of stove. [repeat] clean residue build-up from shelving installed over both food prep sinks and dry storage shelving too. Clean dust and flour accumulation from shleving ovwer biscuit prep cooler and also from the biscuit storage rack to the right of the biscuit prep cooler. (Repeat finding.) What this means
    • Hot & cold water available; adequate pressure 5-103.11(b) - capacity: provide sufficient hot water to meet the peak hot water demands.-pf the water heater had recently been documented to not be working properly, but had afterwards been fixed. It is now not working again. According to manager, a new water heater has been ordered and is scheduled to be installed tomorrow (1-13-2026) at 2 pm to replace the old one. Today water temperatures were checked at hand wash sinks and documented to be as follows: hand sink at front of kitchen = 57F, hand sink beside of ice machine = 65F, and in restrooms 60F. Replace the old water heater within 10 days from today's date. Call dana cavenaugh at (910)253-1721 or e-mail her at dana.cavenaugh@brunswickcountync.gov and request a revisit by her to verify the required water heater replacement is completed and approved before the end of the 10 day period. What this means
    • Physical facilities installed, maintained & clean [repeat] clean debris and residue build-up from floor surface underneath equipment, especially at cookline, under ice machine, under reach-in coolers such at the chicken breading station cooler, under dry storage shelving in back, in cabinet under self-serve drink station, etc.... [repeat] clean accumulated dust, mold, and grease residue from ceiling tiles and hvac air vents in kitchen. [repeat] clean residue build-up from floor surface underneath shelving of walk-in chicken cooler and main walk-in cooler. Clean wall base under shelving in main walk-in cooler. Replace the damaged ceiling tile near window next to the utensil wash sink (the one of the dry storage shelving where single-use cups and other such things are stored). [repeat] replace broken, cracked, and chipped floor tiles in kitchen like those in front of fryers and throughout rest of kitchen. Replace cracked light shield in light fixture over chicken breading station. Reseal between wall surface and hand wash sinks in kitchen and restrooms where old caulking is cracked and peeling from wall. (Repeat finding.) What this means
    • Meets ventilation & lighting requirements; designated areas used 6-303.11 intensity - lighting (c) [repeat for blown lights over food prep areas reducing light intensity] replace the burned out light bulbs in the light fixture over the food prep sinks, chicken breading station, and the utensil wash sink. Today light intensity was measured and found to be reduced due to the blown light bulbs. The light intensity measured today as follows in the noted areas: 30 fc over food prep sinks, 33-43 fc over chicken breading station,19 fc over the left end drainboard of the utensil wash sink. Replace all blown lights. (Repeat finding.) What this means

From the North Carolina county environmental health offices, published as North Carolina environmental health public inspections portal. Text is the inspector's, shortened only for length. North Carolina scores food places out of 100: A is 90 or more, B is 80 to 89.5, C is 70 to 79.5, and below 70 the permit is pulled. Here, an A counts as passed, a B or C as passed with conditions, and below 70 as failed. Child care centers and some other places get no grade; for those, an inspection with items cited counts as passed with conditions. Items 1 to 29 are the foodborne illness risk factors and are listed as serious.

Questions

Did Bojangles #913 pass its health inspection?

Yes. Bojangles #913 passed its most recent North Carolina health inspection on October 19, 2026.

How many times was Bojangles #913 inspected in the last year?

3 times in the last 12 months, with 0 failed results.

Who inspects Bojangles #913?

The North Carolina county environmental health offices. North Carolina scores food places out of 100: A is 90 or more, B is 80 to 89.5, C is 70 to 79.5, and below 70 the permit is pulled. Here, an A counts as passed, a B or C as passed with conditions, and below 70 as failed. Child care centers and some other places get no grade; for those, an inspection with items cited counts as passed with conditions. Items 1 to 29 are the foodborne illness risk factors and are listed as serious.